Case Club 4 Pistol and 16 Magazine Pre-Cut Heavy Duty Waterproof Case with Included Silica Gel Canister to Help Prevent Gun Rust (Upgraded Gen-2)
$103.95
- Holds 4 pistols, 16 magazines (+4 more in the magwells) & comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two metal reinforced padlock points that support a customer supplied padlock with a 0.3″ shackle along with one way hinge pins ensure your gear remains safe and secure.
- Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Base foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won’t absorb moisture or oil. Magazine compartments are dual level & will fit both single & double stack mags of varying lengths. Utilize our specially designed magazine spacers for your single stack mags and remove the spacer for double stack guaranteeing a perfect fit regardless of magazine size.
- Accommodates full size, compact & subcompact pistols with under-barrel attachments and small reflex sights. Foam also has built-in height and length adjustment blocks in which you can use to further customize the fit ensuring even your smallest subcompact pistols fit just as tightly as your full size ones. Max length of pistols is 8 5/8″ & is not intended for revolvers due to their longer barrel lengths.
- Easily convert the case from a 4 pistol version to a 3 pistol & accessory version by removing the pistol module & freeing up room for ammunition & safety gear. Quickly convert it back to the 4 pistol version anytime by putting the module back in. Dual purpose foam design allows for two different configurations for the price of one!
- Pistols sit in a quick draw position so the guns can be picked up properly by their grip in a safe manner. Wide bodied snap latches can be used with thick gloves. Extended front handle length helps counter balance off center weighted loads. All latch & hinge pins are stainless steel. Injected molded case shell with integrated exterior structural ribs increase durability and provide deflection points making this fully ATA approved and compliant in all 50 states.
20 in stock
Add to wishlistAdd to compareAdditional information
| Weight | 6.724091 lbs |
|---|---|
| Dimensions | 17.36 × 14.17 × 7.68 in |
| Closure Type | Snap |
| Pattern | Solid |
| Handle Type | Wrap Handle |
| Number of Compartments | 1 |
| Shell Type | Hard |
| UPC | 856792005071 |
| Item Package Dimensions L x W x H | 17.36 x 14.17 x 7.68 inches |
| Package Weight | 3.05 Kilograms |
| Item Dimensions LxWxH | 16.75 x 12.62 x 6.75 inches |
| Brand Name | Case Club |
| Model Name | 4 Pistol Case |
| Suggested Users | unisex-adult |
| Part Number | ASSYCC540SEPIS4 |
| ASIN | B00K7L4GXY |
| Date First Available | May 8, 2014 |
| Manufacturer | Case Club |
Semper Fi –
Usually a picture is worth 1,000 words. However, there are times where the pictures simply do not do the subject justice, and this is one of those times. The first thing that struck me when I pulled the case from its nondescript cardboard box was its weight. This case truly is stout, but saying that almost downplays the actual construction. It is truly made to withstand the rigors of air travel, and that includes the presumable 800 pound gorillas behind the “scenes” that like to throw and jump up & down on the luggage like the old Samsonite commercials.The case’s fit & finish is excellent as well. The types of foam used inside are well chosen. It all comes together to prove that the folks behind Case Club put some thought into and actually use their own products.My only marginal complaint is the precut magazine cutouts. I missed this in the photo, but I caught onto the design as soon as the case was in my hands. Each of the magazine cutouts has a “donut” cutout. This can be removed to make the cutout more easily fit a double-stack magazine. Unfortunately, the foam is thin enough that slipping a single-stack magazine into them can result in the magazine pushing that “donut” down into the magazine cutout. I think that a better solution may be to have the inner insert cut as a thick-bottomed U instead of a donut. This would probably lend it enough additional strength that it would not collapse into the hole whenever an edge is caught inserting a magazine.This has truly become my favorite pistol case.
Tum –
I really like this case, perfect size, well built, the harder foam works great vs. soft foam. Found it funny how easy the video showed removing foam pieces, was a little difficult to remove lower foam pieces but worked with long needle nose plyers and some tweaking, overall great case for the money and a lot of different configurations. Would not work with 6″ revolver, but perfect for all size semi autos.
N5S-Matter –
This review is for the 4 pistol case, but I also have the 2 pistol case with accessories. I absolutely love both of these cases, and they are my go to range cases now. The rechargeable drying packet, and waterproof seal assure my precious cargo never gets wet, and stays dry if I were ever to store them inside for any length of time. Drier than my safe in fact. The outer shells are very, very well designed, made, and durable, and the inner foam is tough, yet easy to make modification to and keep clean. I can load up on magazines for each firearm. Everything is so well protected from the outside and from each other. You can use the extra foam pulled out to customize the muzzle pockets for different lengths to sit perfectly, or in the magazine compartments so shorter ones don’t sink too low. This is pretty much the perfect solution. I wish I had found and invested in these instead of the myriad of duffel type range bags I bought before them, and fumbled with individual cases stuffed into them. One of these and an ammo can can carry literally everything you could need for a day of plinky fun in a compact, easy to carry and extremely durable manner.